Woodturning Tools & Timber for Woodturners, Woodcarvers & DIY
  • Cart
  • Help
Home » » Crown Tools


261-kw  

3/4" Round Nose Scraper Cryo Handled
$89.00
  When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day you hand them down to the next generation of ...

 

241-RAZW  

Bowl Gouge Cryo Handled 13mm
$139.00
  Bowl gouges are used for turning along the grain and also for turning on end grain. This is exemplified by the relatively straight profile of the tip of the gouge so that it scrapes rather than peels the timber off, to provide a smoother finish on...

 

241-RAZW  

Bowl Gouge M42 Cryo Handled 10mm
$135.00
  Bowl gouges are used for turning along the grain and also for turning on end grain. This is exemplified by the relatively straight profile of the tip of the gouge so that it scrapes rather than peels the timber off, to provide a smoother finish on...

 

242-RAZW  

Bowl Gouge M42 Cryo Handled 13mm
$165.00
  Crown Tools M42 3/8" Bowl Gouge made from cryogenically treated M42 High Speed Steel with ash handle. These tools will remain sharp during long periods of demanding professional use. They are finely polished inside and the bevel is carefully ...

Out of Stock
 

BowlGougeSide Grind  

Bowl Gouge Side Grind M42 Cryo Handled 10mm
$145.00
  Crown Razor Side Grind Bowl Gouge - M42 Cryo When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day...

 

BowlGougeSide Grind  

Bowl Gouge Side Grind m42 Cryo Handled 13mm
$179.00
  Crown Razor Side Grind Bowl Gouge - M42 Cryo When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day...

 

270-ARSKW  

Chisel Skew Round Cryo Handled 13mm
$85.00
  Crown round skew chisels are engineered for balance, control and superior cutting performance. Used for beading, planing and general spindle work, round skew chisels provide free rotational movement saving wear and tear on tool rest surfaces....

Out of Stock
 

Chisel Skew Square 19  

Chisel Skew Square Cryo Handled 19mm
$125.00
  Crown Tools Skew Chisel made from cryogenically treated M42 High Speed Steel with ash handle. These tools will remain sharp during long periods of demanding professional use. Hardened to 66/69 HRC, massively out performing standard HSS tool ...

Out of Stock
 

237-DKW  

Detail Gouge Cryo Handled 13mm
$99.00
  Detail gouges have a shallow flute and thicker cross-section compared with standard spindle gouges, resulting in less vibration and providing a smoother cut. This is due to there being more metal under the flute, supporting the cutting tip. They c...

Out of Stock
 

267-KW  

Dovetail Scraper Cryo Handled
$89.00
  Crown Dovetail Scraper - Cryogenic Steel. These tools will remain sharp during long periods of demanding professional use. Used to cut wood at a blunt angle. Scrapers will not produce a finish that is as good as a gouge, but are useful in many sit...

Out of Stock
 

244-AKW  

Parting Tool Cryo Handled 2.4mm
$69.00
  The Crown® Narrow Parting Tool is designed for use on boxes and other lidded containers as well as pens where you want to maintain grain alignment by removing as little material as possible. While the ultra-thin blade is only 2.4mm wide (appro...

Out of Stock
 

245-kw  

Parting Tool Cryo Handled 3mm
$89.00
  Parting tools cut parallel-sided grooves into your work piece. They are suitable for use in marking beads on the work piece, or separating a work piece from its waste mounted in the chuck to make removal easier once removed from the lathe. Ha...

Out of Stock
 

245-kw  

Parting Tool Cryo Handled 6mm 1/4
$89.00
  When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day you hand them down to the next generation of ...

Out of Stock
 

245-kw  

Parting Tool Cryo Handled Euro 6mm
$119.00
  When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day you hand them down to the next generation of ...

Out of Stock
 

244-AFKW  

Parting Tool Cryo Handled Firmager 1.6mm
$79.00
  Firmager 1.6 mm parting tool from Crown is a chisel, which is suitable for the pure cutting of workpieces can also be used for a shear scrape. The idea for this chisel comes from Melvin Firmager, an English wood-turner. His special work often rese...

Out of Stock
 

230-KW  

Roughing Gouge Cryo Handled 19mm
$119.00
  Roughing gouges are used for turning a square block of timber into a round blank or removing large quantities of timber to get to the correct turning shape. A very steep 170 degrees is used on roughing gouges to scrape away large sections of stock...

Out of Stock
 

270-ARSKW  

Skew Chisel Radius 19mm
$119.00
  When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day you hand them down to the next generation of ...

 

236-KSKW  

Skewchigouge Cryo Handled
$85.00
  Designed by English turner Alan Beecham, this tool will work as a skew chisel and gouge, thus the name Skewchigouge. With equal ease you can cut beads, pummels, balls, birds' beaks, plane, v-grooves, and more. Virtually catch-proof, this amazing t...

 

237-kw  

Spindle Gouge Cryo Handled 13mm
$95.00
  When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day you hand them down to the next generation of ...

 

254-kw  

Square End Scraper Cryo Handled 19 mm
$85.00
  When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day you hand them down to the next generation of ...